Alloy Cored Wire

Cored wire is made by crushing various additives (deoxidizers, desulfurizers, modifiers, alloys, etc.) to be added to molten steel or molten iron to a specified particle size, then wrapping them with cold-rolled low-carbon steel strip to form composite materials of customizable lengths. Cored wire technology is an out-of-furnace refining method developed in the 1980s based on injection metallurgy technology, widely used in steelmaking and foundry operations.

Alloy Cored Wire

Cored wire is made by crushing various additives (deoxidizers, desulfurizers, modifiers, alloys, etc.) to be added to molten steel or molten iron to a specified particle size, then wrapping them with cold-rolled low-carbon steel strip to form composite materials of customizable lengths. Cored wire technology is an out-of-furnace refining method developed in the 1980s based on injection metallurgy technology, widely used in steelmaking and foundry operations.

When used in steelmaking, cored wire can refine the morphology of steel inclusions, improve molten steel castability, enhance steel performance, significantly increase alloy yield, reduce alloy consumption, lower steelmaking costs, and deliver notable economic benefits.

Specification of Alloy Cored Wire

Common types of alloy cored wire for steelmaking and casting include CaSi cored wire, CaFe cored wire, TiFe cored wire, Calcium cored wire, Carbon cored wire, Sulfur cored wire, Ferrosilicon cored wire, and more. We can customize and produce alloy cored wires of various specifications per customer requirements.

Type Chemical Composition (%) Wire Diameter Steel Strip Thickness Meter Weight (g/m) Uniformity (%)
CaSi Cored WireSi 60%, Ca 30%13mm/9mm0.4±0.02mm170 (strip) / 230 (core)2.5-5
CaSi Cored WireSi 55%, Ca 28%13mm/9mm0.4±0.02mm170 (strip) / 230 (core)2.5-5
Carbon Cored WireC 98% min, S 0.5% max13mm/9mm0.4±0.02mm150 (strip) / 150 (core)2.5-5
Calcium Cored WireCa 97% min, Mg 0.8% max, Al 1% max9.0±0.5mm1.0±0.02mm220 (strip) / 52 (core)2.5-5
Calcium Cored WireCa 97% min, Mg 0.8% max, Al 1% max9.0±0.5mm1.5±0.02mm360 (strip) / 52 (core)2.5-5
FeSi Cored WireSi 75% min13mm/9mm0.4±0.02mm150 (strip) / 350 (core)2.5-5
Sulfur Cored WireS 99% min, B 0.1% max, Moisture 0.3% max, Ash 0.2% max, Acidity 0.07% max13mm0.4±0.02mm180 (strip) / 220 (core)2.5-5

Application of Alloy Cored Wire

Precise metallurgical material addition: Cored wire makes it easier to add metallurgical materials to molten steel during steelmaking. The cored wire is fed vertically into molten iron or molten steel via a wire feeder, where the core materials fully melt and react at the desired depth. This effectively avoids reaction between added elements and air or slag, and significantly improves material absorption rate.

Deoxidation & desulfurization: Cored wire is widely used as a deoxidizer and desulfurizer to improve steel cleanliness and quality.

Alloy modification: Through cored wire feeding, the morphology of steel inclusions can be adjusted, effectively improving the quality of steelmaking and casting products.

Calcium silicon cored wire, calcium ferro cored wire, and pure calcium cored wire are used in steelmaking as deoxidizers, alloy additives, and molten steel purification agents. Carbon cored wire and sulfur cored wire are used to adjust carbon and sulfur content in steelmaking and casting. Ferrosilicon magnesium cored wire is used as a nodulizer in ductile iron casting.

Send Inquiry for Alloy Cored Wire

Fill out the form below and we will reply within 24 hours with detailed quotation.

Send Inquiry
💬 WhatsApp ✉ E-Mail 💬 WeChat
WhatsApp
Phone
↑
Email
Inquiry
TOP