Electrolytic Manganese

Electrolytic manganese metal is a manganese salt obtained from manganese ore through acid leaching and then sent to an electrolytic cell for electrolysis to produce elemental metal. Appearance is like iron, irregular flakes, hard and brittle, bright on one side, rough on the other, silvery white to brown, silvery gray after processing into powder; easily oxidized in air, dissolved and replaced when encountering dilute acid Hydrogen, when slightly above room temperature, can decompose water and release hydrogen gas.

Product Introduction

Electrolytic manganese metal is a manganese salt obtained from manganese ore through acid leaching and then sent to an electrolytic cell for electrolysis to produce elemental metal. Appearance is like iron, irregular flakes, hard and brittle, bright on one side, rough on the other, silvery white to brown, silvery gray after processing into powder; easily oxidized in air, dissolved and replaced when encountering dilute acid Hydrogen, when slightly above room temperature, can decompose water and release hydrogen gas.

Mn Flakes
Mn Flakes
Mn Flakes

Specification of Electrolytic Manganese

Electrolytic manganese models include: electrolytic manganese flakes 99.9%, electrolytic manganese flakes 99.8%, electrolytic manganese flakes 99.7%, electrolytic manganese flakes 9.95%

Brand

Chemical Composition(%)

Mn

C

S

P

Fe

Si

Se

≥

≤

Mn99.8

99.8

0.02

0.03

0.005

0.003

0.005

0.060

Mn99.7

99.7

0.04

0.05

0.005

0.003

0.010

0.100

Mn99.5

99.5

0.08

0.10

0.010

0.005

0.015

0.150

Application Of Electrolytic Manganese

Electrolytic manganese scraps can increase the hardness of alloy materials. The most widely used ones are manganese-copper alloys and manganese-aluminium alloys. In these alloys, manganese can improve the strength, toughness, wear resistance and corrosion resistance of the alloys. Due to its high purity and low impurity characteristics, electrolytic manganese metal has been widely used in steel smelting, non-ferrous metallurgy, electronic technology, chemical industry, environmental protection, food hygiene, welding rod industry, aerospace industry and other fields.

Steel Manufacturing
Non-Ferrous Metallurgical Industry
Chemical Industry
Electronic Technology Industry
Aerospace Industry
Welding Rod Manufacturing

Electrolytic Manganese Production

There are two main methods of refining manganese metal: thermal method (fire method) and electrolytic method (wet method). The purity of thermal method production (metal manganese ingots) does not exceed 95~98%, while pure metallic manganese is prepared by the electrolysis method (Electrolytic metal manganese), its purity can reach over 99.7~99.9%.
Electrolytic production has become the main method of manganese metal production. The equation is: Mn+H2O(heat)=Mn(OH)2+H2↑
The main raw materials of electrolytic manganese metal are manganese oxide ore and manganese carbonate ore. Except for the different liquid preparation methods in the previous process, the electrolytic production process is basically the same.
Global electrolytic manganese production companies are mainly concentrated in China and South Africa. China is the world's largest electrolytic manganese producer. Electrolytic manganese produced in China is mainly exported to countries such as South Korea, the Netherlands, Russia, Japan, India, Taiwan, the United States, Brazil and Slovenia.

Send Inquiry for Electrolytic Manganese

Fill out the form below and we will reply within 24 hours with detailed quotation.

Send Inquiry
💬 WhatsApp ✉ E-Mail 💬 WeChat
WhatsApp
Phone
↑
Email
Inquiry
TOP